SPIKE-SPIKER® BRAND A.C. POWER LINE
TRANSIENT VOLTAGE SURGE SUPPRESSORS
WITH EMI/RFI NOISE FILTERING

BENEFITS

• Protect expensive electronic equipment from damage caused by lightning and other causes of transient over-voltage conditions on the AC power line.
• Attenuate EMI/RFI noise on the AC power line.
• Reduce false alarms and "no trouble found" service calls.
• Reduce system "glitches" and unprotected downtime.
• Reduce loss of programmed information.
• Increase equipment reliability.
• Increase equipment life expectancy.
  

THE SPIKE-SPIKER® DIFFERENCE

Kalglo SPIKE-SPIKER® brand surge protectors are not like the common ordinary inexpensive strips that do not adequately protect expensive electronic equipment from voltage surges. Inexpensive strips only provide you with multiple outlets with a minimum amount of surge protection for a false sense of security. Kalglo SPIKE-SPIKERS® are designed for maximum protection and longevity. Load bearing, current limiting, heavy choke coils provide instantaneous response. A multiple stage design allows the SPIKE-SPIKER® to protect itself, as well as the load, for maximum effectiveness and durability. Users have told us that our SPIKE-SPIKERS® worked when other well known brands have failed when hit by the same transient voltage surge. A computer dealer wrote this about SPIKE-SPIKERS®, "We had looked all over for something that really worked. We no longer need to look."

Model Mini-II
Two Outlet, Direct Plug-in.

FEATURES and SPECIFICATIONS

• Simple plug-in unit with two grounded surge and noise protected outlets.
• Rated 120VAC 50/60HZ, 12 Amps, with status light and externally replaceable fuse.
• Premium grade circuit design proven to be effective and durable.
• Bi-polar and bi-directional protection for attached equipment.
• Surge protection and noise filtering on both normal and common modes. 355 Joule surge energy absorption capacity in three stages of MOV's. 40+ db noise insertion loss @ 10 MHZ.
• Instantaneous response time. Heavy choke coils help limit propagation to less than one wire foot before full suppressor activation. Clamping starts at 140 VAC RMS.
• Suppressed voltage rating of 400 Vpk with 500A-6KV surge. High impact and flame resistant polymer case.
• Meets or exceeds surge environment requirements defined by ANSI C62.41 1980 (IEEE Std. 587-1980) Guide for Surge Voltages in Low Voltage AC Power Circuits, Categories A & B.
• Dimensions: (H) 4" x (W) 3" x (D) 1.5" 1 lb. approximate shipping weight.
• Lifetime limited warranty.
• Made in USA.

Model QPC
Four Outlet, Cord Connected, Dual, Separately Filtered Banks.

FEATURES and SPECIFICATIONS

• Status light, 7 ft. cordset, main switch, replaceable main fuse, anti-static discharge faceplate.
• Four grounded surge and noise protected outlets.
• Rated 120VAC 50/60HZ, 15 Amps total, 12 Amps per outlet.
• Surge protection by MOV's on common mode (hot to ground and neutral to ground) and on differential mode (hot to neutral). 455 Joule surge energy absorption capacity.
• Instantaneous response time. Heavy choke coils help limit propagation to less than one wire foot before full suppressor activation. Clamping starts at 140 VAC RMS. Suppressed voltage rating of 400 Vpk with 500A-6KV surge.
• Dual circuit multi-stage broadband EMI/RFI noise filtering provides two separate banks of filtered outlets. 38 db common mode noise insertion loss and 56db differential mode noise insertion loss@ 10 MHZ.
• Heat and fire resistant phenolic case.
• Meets or exceeds surge environment requirements defined by ANSI C62.41 1980 (IEEE Std. 587-1980) Guide for Surge Voltages in Low Voltage AC Power Circuits, Categories A & B.
• Dimensions: (H) 5" x (W) 4 1/4" x (D) 1 3/4" 2 lbs. approximate shipping weight.
• Lifetime limited warranty.
• Made in USA.

---

Model DPC
Eight Separately Switched Outlets, Cord Connected, Dual, Separately Filtered Banks.

FEATURES and SPECIFICATIONS

• Status light, 7 ft. cordset, main switch, replaceable main fuse, anti-static discharge faceplate.
• Eight individually switched grounded surge and noise protected outlets.
• Rated 120VAC 50/60HZ, 15 Amps total, 10 Amps per bank, 6 Amps per outlet.
• Surge protection by MOV's on common mode (hot to ground and neutral to ground) and on differential mode (hot to neutral). 585 Joule surge energy absorption capacity.
• Instantaneous response time. Heavy choke coils help limit propagation to less than one wire foot before full suppressor activation. Clamping starts at 140 VAC RMS. Suppressed voltage rating of 400 Vpk with 500A-6KV surge.
• Dual circuit multi-stage broadband EMI/RFI noise filtering provides two separate banks of filtered outlets. 35 db common mode noise insertion loss and 60db differential mode noise insertion loss@ 10 MHZ.
• Heat and fire resistant phenolic case.
• Meets or exceeds surge environment requirements defined by ANSI C62.41 1980 (IEEE Std. 587-1980) Guide for Surge Voltages in Low Voltage AC Power Circuits, Categories A & B.
• Dimensions: (H) 6 1/4" x (W) 5" x (D) 2 1/4" 3 lbs. approximate shipping weight.
• Lifetime limited warranty.
• Made in USA.

Model XP-4
Four Outlet, Cord Connected, for Plug-in Transformers.

BENEFITS and FEATURES